Happy Holidays from everyone at Modern Masters! We hope your holidays will be filled with good food, joy, and laughter.
Happy Holidays from everyone at Modern Masters! We hope your holidays will be filled with good food, joy, and laughter.
Rooms with a View is a high-end interior design show created by late Dean of American Design Albert Hadley, and currently chaired by designer Thom Filicia. Celebrating its 22nd year, the event occurred this past November in Connecticut and talented designers came together to create 12 one-of-a-kind interior design vignettes.
Cynthia Davis of Cynthia Designs – we’ve featured her before in our Modern Mastery series – used Modern Masters products to finish the vignette walls in collaboration with designer Stephanie Rapp of Stephanie Rapp Interiors. Ms. Rapp wanted a sexy, smokey room for her room vignette. After reviewing fabrics and discussing the mood Stephanie wanted to create, she and Cynthia selected a sleek, metallic finish for the walls.
The walls were first base coated in a matte black paint. Then, Black Panther Metallic Plaster was troweled on as a thin texturing layer. Using the Modern Masters trowel, they created small peaks and while wet, knocked the peaks down to a smooth finish allowing for some variation in texture.
Are you as excited about Rogue One opening this week as we are? The one person possibly more excited than us is Katie Gaines of Love Paper Paint. She’s heading to an early screening dressed as Jyn Erso and there’s a bonus in it for you – she’s sharing her cosplay DIY! We’ll let her take it away…
It’s the most wonderful time of the year – time for peppermint mochas, gingerbread houses, holiday decorating, sparkling lights and…
…THE NEW STAR WARS MOVIE!!! (I just may be more excited about that than anything else this holiday season!)
A friend invited our family to an exclusive (early) screening of Rogue One: A Star Wars Story on December 15th. So we get to see the film hours earlier than anyone else. How cool is that?! My family is very excited!
Always looking for an excuse to dress up, I thought I’d throw together a quick costume to wear to the movie. But since this is a busy season for me, I don’t have a lot of time or money to spend on creating a costume…I found this photo of smuggler turned Rebel soldier, Jyn Erso, that seemed doable with limited time and resources.
I gathered some materials I had around the house and in my garage:
BLASTER: (I’m only showing for purposes of the cosplay idea, but won’t be bringing to the screening.) These are photos of the blaster I painted last year for my brother-in-law’s Boba Fett costume and my son’s “post apocalyptic warrior” costume from Halloween. The transformation is pretty awesome considering that the DIY is really very easy: simply spray paint the toy blaster with black primer, then dry brush a little bit of Modern Masters Silver and Blackened Bronze Metallic Paint. As with all Modern Masters products, a little bit goes a long way.
GAS MASK: For the “gas mask” apparatus, I sprayed the flex tubing and the dust mask black and then painted them with Statuary Bronze Metallic Paint. Since this will simply hang around my neck, I’ll attach the flex tubing to the mask and then to my clothes with Gaffer’s tape. I don’t want to have it wrap around my back as it’ll be uncomfortable to sit on in the theater, so I’ll cut the tubing and just have it hang in front of me, or tuck it into my belt.
HAT and GOGGLES: I have a black hat that I use as a painter’s cap and it looks identical to the hat Jyn Erso is wearing in the photo. Using a little bit of Blackened Bronze Metallic Paint, I lightly dry brushed the edges of the brim to give it a weathered look. I wrapped the safety googles in Gaffer’s tape because it takes paint really well and I wanted to modify the look of the edges. It’s not a perfect match to the smooth metallic frame of Jyn Erso’s goggles, but the tape is completely removable, so once I’m done with the cosplay, I can peel off the tape and use the goggles again for work. After wrapping the goggles, I painted over the Gaffer’s tape with Champagne Metallic Paint and used a Sharpie to draw in some details.
BANDOLIER: For Jyn Erso’s bandolier or ammo belt, I wrapped strips of card stock with Gaffer’s tape to create a sash/belt that will be slung over one shoulder. Then I wrapped the dead AA batteries with Gaffer’s tape and adhered them to the bandolier. Using bits of folded and rolled card stock, covered with Gaffer’s tape, additional pockets and details were added. Again, with a quick dry brushing of Blackened Bronze Metallic Paint, the bandolier was given a battle-worn look.
And that’s it! I’ve used these accessories to dress up a military style jacket, jeans, boots and a scarf that will pull together my look as Jyn Erso at the Rogue One screening. Be sure to check out my @LovePaperPaint Instagram feed for more on the full costume and movie event!
Happy Holidays and May the Force be with You!
The Rogue One Star Wars Cosplay DIY is by Katie Gaines of Love Paper Paint. She is a Southern California Decorative Painter, Muralist and Artist, who also designs gorgeous custom stationery and invitations. In addition to their foodie adventures, Katie’s Star Wars-obsessed family (including her creative husband and two artsy boys), are cosplay enthusiasts and often fabricate group costumes together just for fun during Halloween, for parties, and to attend San Diego Comic-Con International.
Delight your guests by creating stenciled Winter Wonderland Placemats for your holiday table! A winterscape themed holiday gathering is easily at hand with this beautiful DIY project by Mary Childs of Focal Points.
I would suggest planning out the stencil design placement (both the vinyl stencils and the mylar stencils) ahead of time. Once you have your design in mind, place the vinyl sticky snowflakes onto the placemat. (I used free holiday vector snowflake patterns found online and generated them on a Cricut.) Use a burnishing tool or old credit card to help seal the edges of the snowflakes. You can also apply a thin layer of clear acrylic to seal the edges and prevent any paint from leaking under the vinyl snowflakes. If you seal the snowflakes with the clear acrylic, let this dry before moving on to the next step.
Use the cigar roller to apply a thin layer of Shimmering Sky Metallic Paint to the entire surface of the placemat and let dry about one hour. Repeat with a second coat until the Shimmering Sky becomes opaque. Let dry and then remove the vinyl snowflake patterns, which will reflect the white Snowflake Metallic Paint nicely against the blue of the Shimmering Sky Metallic Paint.
Position the snowflake mylar stencils by Royal Design Studio to taste. You can overlap them like I did or keep them singular. Stencil the patterns with the Snowflake Metallic Paint and stencil brush, taking care to offload the material thoroughly from the stencil brush to ensure no leakage under the stencil. While the Snowflake Metallic Paint is still wet, remove the stencil and sprinkle black or white fine glitter to taste. Let dry and brush off the extra glitter.
The Winter Wonderland Placemat Christmas DIY is by Orlando, FL-based decorative painter Mary Childs. Her Focal Points, Inc. studio creates professional decorative finishes and antique mirrors for clients throughout the US.
A little bit of country and a little bit of glam surround the Mason Jar Luminaries created by Debbie of My Patch of Blue Sky. This is an easy DIY that is sure to light up your Christmas holiday decor!
Apply removable holiday patterns on the mason jars. I chose to center them but you could also apply them randomly around the entire jar. I used free holiday vector art patterns found online and generated them on a Cricut.
After you have your designs on the jar, prime the jar with an acrylic glass primer – bonus points if it can closely match the tone of the Metallic Paint. Let dry. Then, brush on two coats of Snowflake Metallic Paint. Once dry, carefully remove the vinyl sticker patterns. Add your chosen fill inside the jar, tea lights, and decorative ribbon. Practice good fire safety rules when using the mason jar luminaries and enjoy your pretty project!
Be THE Christmas House with the amazing and stylish holiday table decor! Mary Childs of Focal Points, Inc. can help with a DIY Painted Woodland Birch Napkin that shimmers with whimsy and hand-applied flair.
Using a 2″ brush or cigar roller, apply a thin, even coat of Snowflake Metallic Paint on the napkin. Let dry 30 minutes to an hour between coats. At the end of the project, there will be two blue borders and an area between the borders in Snowflake Metallic we just painted. Be sure to check out the end results so that you can visually see how all the steps are going to come together!
We are now creating and working on the borders. Apply the 1/4″ masking tape to the very top and bottom edges of the napkin. Starting on the TOP left side of the napkin, measure down 2 inches and make a small pencil dot. Repeat this on the right side, then flip the napkin and repeat on the bottom. Use the blue Painters Tape and tape from dot to dot horizontally, creating the borders.
I would suggest planning out the stencil design placement (both the vinyl stencils and the mylar stencils) ahead of time. Once you have your design in mind, place the vinyl sticky snowflakes onto the napkin, INSIDE the taped borders only. (I used free holiday vector snowflake patterns found online and generated them on a Cricut.) Burnish the tape edges and snowflakes to create a good solid seal as we’ll be painting over them. You can re-apply Snowflake Metallic Paint to help seal the edges, which I did. Let dry.
Use the cigar roller to apply a thin layer of Shimmering Sky Metallic inside the taped border areas where the snowflakes are and let dry. Repeat until opaque and then let dry fully.
Remove the sticky snowflake vinyl stencils and then position the snowflake mylar stencils by Royal Design Studio to taste. You can overlap them if you’d like! Stencil the patterns with the Snowflake Metallic Paint and stencil brush, taking care to offload the material thoroughly from the stencil brush to ensure no leakage under the stencil. While the Snowflake Metallic Paint is still wet, remove the stencil and sprinkle black or white fine glitter to taste. Let dry, brush off the extra glitter, and remove the tape. Your borders are done!
For the center area painted with Snowflake Metallic Paint, we will now be creating a birch tree pattern. Use a pencil to LIGHTLY draw in a few guidelines for the birch bark pattern, the looser the better. (You can Google birch tree images for reference.) Use the fine artist brush and loosely paint the random horizontal birch bark lines with Black Pearl Metallic Paint. Let dry. You are done with your holiday project!
The Shimmery Woodland Birch Napkin Christmas DIY is by Orlando, FL-based decorative painter Mary Childs. Her Focal Points, Inc. studio creates professional decorative finishes and antique mirrors for clients throughout the US.
Such a cute idea for sharing your favorite holiday expressions! Debbie Hayes of My Patch of Blue Sky creates super fast and easy stenciled throw pillows that add a little fa la la fun to your holiday decor! The best part is that you can use these techniques to create custom pillows for holidays year round.
INSTRUCTIONS FOR POLKA DOTS PILLOW
Lay the mylar stencil stencil over the blank pillow cover. Tape in position.
Dip the tip of the stencil brush into the Pale Gold Metallic Paint and remove excess paint on paper towels. The stencil brush should seem almost dry. Using a swirling motion over each stencil with the metallic paint, ensuring that excess material is not seeping under the stencil. Let dry, then stencil another coat if needed. Let dry. Insert the pillow insert.
INSTRUCTIONS FOR 'BAH HUMBUG' LETTERED PILLOW
Apply and secure the Bah Humbug vinyl lettering stencil over their designated pillow cover. Tape in position. Repeat the stenciling process as outlined above. After stenciling, remove the vinyl lettering and let dry.
This Holiday DIY is as versatile as it is charming! Debbie of My Patch of Blue Sky textures and paints a wine glass that adds an elegant twist to your stylish holiday table setting. Once the holidays are over, you can use the conversation piece again and again for gatherings large and small.
I recently visited the headquarters of Modern Masters and was inspired to create this holiday project by the beautiful birch trees around the property, with a winter twist. For the stem, use a small brush to add the simulated tree bark, using ShimmerStone. The ShimmerStone adheres to glass beautifully and gives a shimmery textured look and feel.
Prepare the frosting bag with ShimmerStone. I kept it the original color here but if you wanted to, you could tint the ShimmerStone to taste using color concentrates. Use the frosting bag to create texture for birch bark and also add snowflakes and stars. Have your preferred image handy to guide your artwork, if needed.
Once the Shimmerstone has dried, add a few lines of Black Pearl Metallic Paint (not shown) to further simulate the birch bark look. Let dry. Use for wine (wash by hand) or as a candleholder, with small tea lights. If using as a wine glass, we would recommend drinking out of the back area where there is no ShimmerStone. Of course, the beauty of this project is that you can customize the placement of your design from the top to suit your use of the project.